Probably we have all heard of what irrigation is and how necessary it is for the plants but on the other hand, there has always been a debate on irrigation and how so much water was being wasted on this process.
A Complete Guide To Install Drip Irrigation System
Drip irrigation is a type of irrigation where water is spread across an area in such a way that it reaches straight to the roots and the base of the plants.
Here are a few benefits of drip irrigation:
It Prevents Diseases & Weeds
With drip irrigation, you get to protect your land and your plants especially. What actually happens is that drip irrigation never soaks the ground in water it is just that it provides water only on the required areas and the roots mostly. This ultimately results in the prevention of diseases and especially weed.
It Helps In Conserving Water & Time
Watering your plants and ground with hoses can take a lot of time and you will have to spend your whole day if the ground is big. However, this is not the case with the drip irrigation system and with it, you can set timers that can provide water to the ground according to a set time on daily basis.
This will save you a lot of water too and there are high chances that your water bills will be lower than normal.
Preserving Soil Structure & Nutrients
Watering is necessary for your ground but seeping the water into the soil is not what you should do and if you are using huge water hoses then obviously it can risk the soil and even the nutrients will get washed away when there is a lot of water in the ground. The plants will also get suffocated and the soil will become compacted, however, this is not the case with drip irrigation systems.
With these systems, you get to use very less water and even your job of watering the plants is done to perfection. Sprinkling or streaming the water on your ground is the best way to preserve soil structure and nutrients and that can be done with the drip irrigation system.
These are the few main benefits of using drip irrigation system to water your plants and the soil too. Now, you might be wondering how you can install a drip irrigation system and what do you want to get it all made.
Well, don’t worry because here we are to answer all your questions and we now are going to jot down some steps that will help you in the installation process.
So, folks, take notes of what we are about to tell you because this article might give you all the information that you need regarding drip irrigation.
DO YOUR HOMEWORK
You see there are different lengths of pipes available in the market through which you can make a drip irrigation system. Most of the micro irrigation is done by drip tubing and a hose which is fitted with tiny little plastic tubes that are also known as emitters. These emitters help you in providing water to the plants in regulated places without any clogging or blocking.
There are companies that even sale soaker hoses laser perforated rubbers that help in weeping water in the soil without any emitters so yes at the end of the day it all depends on what you want and how you want your drip irrigation system to work.
Also, there are different accessories available in the market for different plants. You will also find sprays for covers, foggers, and emitters too that reach the plants through the grids.
CONNECT TO AN OUTDOOR FAUCET
You then have to connect all the setting you bought and connect it with a faucet which is going to be the water supply for you. One of the easiest way to have a drip irrigation system is to have an outdoor faucet connection as it makes things easier for you. You can even set it for automation by using a hose end timer so that you don’t have to keep a check on the water flowing into the ground.
Lay On The Tubing
Take a hose bib that is long enough to reach to the ground where the plants are and now attach a long length of tube or garden hose to that bib. Once done, you then have to put the emitters on the tube in such a way that they are near the roots. Make sure that the line of tubing is somewhat around 12 inch so that it can reach the roots of the plants easily.
Don’t Forget To Close The Tubing Ends
After you all done with all the connections and the attachments you then have to turn on the water in order to flush away all the dirt and then turn off the water. After you have turned off the water, you now have to put a one and a half inch clump on the open end of the tube. Make sure you have closed the tube from the end into a crimped position.
Here you go with a drip irrigation system of your own. If you actually care a lot about your garden and the plants that you’ve grown in it then you need to install a drip irrigation system at your home. Don’t worry, it won’t cost you much and the benefits with which it comes are numerous so yes, all your money will be paid back to you in the form of amazing results.
Installation Of Ground Stakes
Now, once you have placed all the tubes in the right position, you then have to use ground stakes made up of plastic to hold the tubing down. Also, if you feel like the tubing has to be turned at some sharp angle then all you need to do is to cut the tube and reattach it once the turn is over. After cutting, leave it all open to flush it with water afterward.
Position Sprayers To Cover The Ground
If the plants on your ground are really dense then you can take help of the micro sprayers as they are easy to place and easy to use too. With micro sprayers, you can easily provide water to the roots of the dense plants and hence your drip irrigation will be done easily.