Needle nose pliers are versatile tools that most electrician, jewelers, and network engineers depend on for work. They are perfect for stripping wires. You can also use them to position wires, bend stuff, and manipulate small parts when making jewelry or circuit boards. Like the bonsai cutters that are available online, needle nose pliers come in a plethora of designs. You can also find various sizes that meet the demands of different people. Before you buy on thus, check the product that you are buying. Make sure that it is the best of the best before reaching for your wallet.

   

What should you look for when shopping for new needle nose pliers? First, check its material. As most tools, needle nose pliers undergo a lot of abuse. A model that will break and bend as you work on a project is not worth your time. Working on small circuit boards and jewelry requires a lot of concentration. The pliers that you buy, thus, should be easy to use. A heavy model with an uncomfortable handle will only lower your experience in the end. Here are 10 of the best models that are both durable and easy to use:

10. Xcelite NN7776V

Xcelite NN7776V

The versatility of needle nose pliers has made them sought-after devices in many industries. However, with the influx of fake tools online, most individuals have a difficult time getting the best for day-to-day use. If you are one of them, Xcelite NN7776V is a good product to use. Ranked among the best in 2017, you get a long (6-inch) accessory with a serrated 2-5/16-inch jaw that never disappoints. It cuts well. It also bends and strips well without snapping or bending out of shape.

Even though thin, Xcelite NN7776V lasts longer than most pliers in this niche do. This is because of the quality steel used to manufacture it. Hardened, the material is durable. It does not break and or chip easily under pressure. This pliers resists rust and corrosion well. Finally, you get a symmetrical product with no misalignment or gaps that can lower its performance over time.

Whilst in use, some models of pliers slip from hands because of their low-grade designs. Others irritate and lower the experience of users over time. With Xcelite NN7776V, you do not have to worry about these issues. It is light and comfortable to use. It also has ergonomic handles with rubberized grips that do not slip easily. If you have sweaty hands, you will appreciate the value of this pliers.

Pros:

  • Hardened steel body
  • Long (six-inch) design
  • Non-slip handles (rubberized)
  • No misalignment or gaps
  • Serrated 2-5/16-inch jaw

Cons:

  • None

9. Hakko CHP PN-2007

Hakko CHP PN-2007

With Hakko CHP PN-2007, you get an ergonomic long nose plier that is perfect for working in tight spaces. Lightweight, for instance, you will enjoy using it for long. It is also affordable and has a long and slender jaw (32mm long x 3mm wide) that many people like. You can use it for electrical work in tight spaces with positive results. Jewelers and engineers also appreciate its value.

Even though cheap, do not question the longevity of this product. As the best scissors, its premium design has made it a sought-after product worldwide. Made of a 3mm thick heat-treated carbon steel, for instance, Hakko CHP PN-2007 is as tough as an ox. The material is chip proof. It also strips, cuts, and pull efficiently without losing its shape over time. Finally, its glare Parkerized surfaces are both rust and corrosion resistant.

Hakko CHP PN-2007 is a comfortable needle nosed pliers. In addition to its durable body and jaws, you will like its cushioned dolphin-style handles. They are comfortable. They are also non-slip and have non-conductive surfaces that protect users from electrical shocks.

Pros:

  • Cushioned dolphin-style handles
  • Non-conductive handles (thick)
  • Rust and corrosion resistant
  • 3mm thick heat-treated carbon steel
  • Long and slender jaw

Cons:

  • Jaws misalign over time

8. Stanley 84-101

Stanley 84-101

Do you do basic wiring and or electrical tasks at home or at your job? Are you tired of using the poorly balanced set of pliers that you bought many years ago? To get a suitable replacement, consider buying Stanley 84-101. This is a reputable brand. It also has a long 6-inch design that is perfect for working in tight or hard to reach areas.

Some low-quality pliers have a tendency to break without break without warning. Even though the high-handedness of operators is partly to blame, the low-grade materials used to make this are the problem. You will not have a similar issue with Stanley 84-101. Made of forged steel, it is a durable accessory. You can drop it a few times without it shattering on impact. It is also corrosion resistant. Finally, you get hardened cutting edges that last even longer.

Designed to meet the ANSI standards, you get a quality tool on a budget. Double dipped in rubber, for instance, its handles are comfortable. You do not have to worry about bruises and other issues. They are also ergonomic and have non-slip surfaces that improve the performance of users.

Pros:

  • Double dipped rubber handles
  • Hardened cutting edges
  • Forged carbon steel
  • Meets ANSI standards
  • Long 6-inch design

Cons:

  • Small handles

7. IRWIN Tools VISE-GRIP Pliers

IRWIN Tools VISE-GRIP Pliers

Pliers are among the must-have accessories in the engineering and electrical industries. To get the best for everyday use, IRWIN Tools VISE-GRIP Pliers stands out in many ways. With a jaw size of 5.5-inches, for instance, its versatility is impressive. Whether you are working on the bench or a hard-to-reach area, you will cut wires and other materials easily. The jaw also handles stripping and bending jobs well.

As most pliers listed, IRWIN Tools VISE-GRIP Pliers withstands the test of time well. Made of nickel chromium, for instance, its durability is outstanding. It does not break easily. Its machined edges grip excellently. Finally, because it has spring-loaded jaws, you do not have to exert a lot of effort to cut or strip effectively.

The thick VISE grip handles that this took has are fun to use. They grip tight in the hands, for instance. The rubberized material used to coat them is also durable and non-slip.

Pros:

  • Slender 5.5-inch jaw
  • Soft and non-slip handles
  • Durable nickel chromium body
  • Tight gripping edges (machined)
  • Spring-loaded jaws

Cons:

  • Misaligned jaws
  • Spring breaks easily

6. TEKTON 3506

TEKTON 3506

   

When handling sensitive projects accuracy and precision are key. Unfortunately, with the heavy or misaligned pliers that some people have, they are hard to maintain. Buy TEKTON 3506 to solve this problem. Made of deep forged and heat-treated steel, it is a durable tool. Devoid of the job that you do, you will have a good time with it for years.

Are you tired of using the misaligned jaws of your old set of pliers? With a brand new TEKTON 3506, you will never worry about this problem again. Like its body, its jaws are durable. They also have precision-machined edges that grip well a self-opening system that lowers operator fatigue. This is unlike some brands that require “HULK-like” hand to strip and cut efficiently.

Do you work on electrical circuits for many hours every day? You will also benefit from this product. It is lightweight, for instance. You can use it effortlessly for many hours. It also has ergonomic handles with soft and non-slip grips that orient hands naturally.

Pros:

  • Self-opening jaws
  • Precision-machined edges
  • Deep forged and heat-treated steel
  • Soft and non-slip grips

Cons:

  • Short reach (small)

5. Channellock 3017

Channellock 3017

Even though Channellock 3017 does not have a side cutter, you get a lightweight accessory with a versatile design. Measuring around 8-inches, for instance, it is one of the tallest products in this niche. This benefits users in many ways. First, its reach is better. You can access and work in tight spaces effortlessly. You can also do most types of projects well without your hand getting in the way.

Manufactured in the USA using a C1080 high carbon steel, the performance of this needle nose pliers is impressive. It is durable. Both its body and jaws hold up well over the years. It also has chip/dull proof edges (laser treated) and sturdy handles that do not snap under pressure.

The quality of Channellock 3017’s jaws has made it a sought-after product globally. They are sturdy and well aligned. The anvil and knife-like edges that they have work well. Finally, both jaws have crosshatch patterns that grip both large and small materials well.

Pros:

  • Sturdy and well-aligned jaws
  • Tight gripping crosshatch patterns
  • C1080 high carbon steel
  • Laser treated edges
  • Long 8-inch design

Cons:

  • Lacks a side cutter

4. Chicago Tool 11″ Long Nose Pliers

Chicago Tool 11" Long Nose Pliers

With Chicago Tool, you get an 11-inch long nose pliers made of a durable deep forged steel. Built to meet ANSI standards, it is a durable device. It is also lightweight, safe to use, and has a reliable system that does not types of jobs well. Whether you cut, strip, or bend wires often, this is one of the best pliers to use.

To electricians and engineers, there is nothing as frustrating as using a pair of uncomfortable pliers at work. If you have one that you are planning to get rid of, replace it with this 11-inch Chicago Tool. Its handles are sturdy and ergonomic. They also have durable hinges and cushioned surfaces that are both soft and non-slip.

Pros:

  • Cuts, strips, and bends well
  • Sturdy and ergonomic handles
  • Long 11-inch design
  • Meets ANSI standards

Cons:

  • None

3. Irwin Tools IRWIN VISE-GRIP 2078218

Irwin Tools IRWIN VISE-GRIP 2078218

A popular tool in many reviews, IRWIN VISE-GRIP 2078218 is a reputable long nose plier that measures eight inches. Made of nickel-plated chromium, it is a stylish accessory. It is also durable and has a treated surface that resists corrosion and rust over the years. You will enjoy using one for many years.

Does your set of pliers irritate you whenever you are working? With this model, you will never grapple with such challenges again. All edges, for instance, are smooth and non-irritant. Jaws (precision-machined) grip most types of materials well. Finally, its ergonomic handles are not only durable but also designed to fit comfortably in the hand. The non-slip proTouch grips that they have, for instance, maintain their stability as you work on delicate projects.

Irwin Tools IRWIN VISE-GRIP 2078218 is perfect for engineers. Electricians and DIY enthusiasts also appreciate its superior quality.

Pros:

  • Non-slip proTouch grips
  • Comfortable handle
  • Heavy-duty body and jaws
  • Rustproof nickel-plated chromium

Cons:

  • None

2. UXcell Needle Nose Pliers

UXcell Needle Nose Pliers

Do not waste your money on one of cheap yet ineffective nose pliers currently available in some stores. To have a memorable experience, this 5-inch model from UXcell is one of the best to use. Even though slightly shorter than some brands (5-inches), its comfortable design has won the hearts of most individuals. You do not have to worry about bruises and or irritation as you work on your projects.

The needle nose head that buyers get is perfect for jewelry work. Whilst working, you can easily grab small components without losing or damaging them. They also have dual leaf springs that lower hand fatigue. This enables you to work longer. The smooth motion that it generates also improve the precision of users.

Pros:

  • Comfortable handles
  • Rounded edges
  • Convenient length (5-inches)
  • Cost effective tool
  • Non-fatiguing dual leaf springs
  • Non-slip rubber coating

Cons:

  • Poorly machined tips

1. Stanley 84-096

Stanley 84-096

Recommended for personal and professional use, Stanley 84-096 tops our list. With one, you get a long (5-inch) and tempered needle nose pliers that strips, cuts, and grips efficiently. It also has a low profile design that penetrates and works well in tight space.

The forged chrome used to make this tool resists abuse well. It is also rustproof and has well-ground edges that do not irritate users. Finally, both handles have ergonomic designs. They are comfortable and have double-dipped grips that improve its stability. Buy one today to get a limited lifetime warranty.

Pros:

  • Limited warranty
  • Double dipped handles
  • Well ground edges
  • Heavy duty forged chrome
  • Multi-functional design

Cons:

  • Somewhat small
  • Poorly machined

Conclusion:

Needle-nose pliers have a wide application in various sectors. They are perfect for stripping or cutting wires. Other people use them to assemble circuit boards in industrial settings. If you are looking for a new one for day-to-day use, we have done the legwork for you. The 10 pliers that we have listed herein are durable. They also have multi-functional designs that suit the needs of most people. Buy yours today.

 

Related articles

Leave a Reply

Your email address will not be published. Required fields are marked *